<-Office schedule around a new year->Our office will be closed from Dec. 26 (Sat.) to Jan. 5 (Tues.). Please noteno shipping during this period. <-Home page update->Please note that our home page will be updated during this period. If youhave difficulty connecting or if you get an error, please try again afterwaiting a while.
GPA v4.12 releasedCurrently, the effect of scan-line distortion on the strain maps is reduced by eliminating its effect on the phase map. Namely, the scan-line correction is applied to the phase maps.Now, we have added the command to apply the scan-line correction to the original STEM image. This command uses the functionality of the Displacement …
IWFR 2.0 releasedCurrently, the IWFR reconstructs the exit wave function (EWF) assuming a constant defocus step. However, using the reconstructed EWF, the defocus values can be refined by the Refine command. Then, using the newly determined the IWFR reconstruct a new EWF without assuming the constant defocus step. By repeating the Refine and IWFR we …
Jitterbug v3.5 releasedFrom this version the MCR (Matlab Compiler Runtime) is no longer needed.To do so we have changed the algorithm to determine the best peak size, but the similar results have been obtained. xHREM/STEM Extension v4.6 beta releasedThe capability to calculate the STEM-DPC signals is added to the STEMExtension. Here, the DPC signals is …
1. GMS 3.4-savvy plug-in DLLs (Forth edition)Now, GMS 3.4 gives a warning message informing you that there is an incompatibility issue with the old plugin DLL. To address this issue, we will release the new plug-in DLLs in sequence. This month we have released the following plug-ins for GMS 3.4:IWFR v1.12.1FTSR v2.5MSA v2.3QPt v3.1Now, all the plug-ins has became GMS 3.4-savvy.
1. GMS 3.4-savvy plug-in DLLs (Third edition)Now, GMS 3.4 gives a warning message informing you that there is an incompatibility issue with the old plugin DLL. To address this issue, we will release the new plug-in DLLs in sequence. This month we have released the following plug-ins for GMS 3.4:EDT v1.0QED v1.5.7sMoire v1.3.2HoloLive v1.0The already updated plug-ins: DeConvEELS, DeConvHAADF, Jitterbug, HoloDark, PPA, qHAADF, GPA, qDPC, …
1. GMS 3.4-savvy plug-in DLLs (Second edition)Now, GMS 3.4 gives a warning message informing you that there is an incompatibility issue with the old plugin DLL. To address this issue, we will release the new plug-in DLLs in sequence. This month we have released the following plug-ins for GMS 3.4:DeConvEELS v3.6.1; DeConvEELS SI v3.6.5DeConvHAADF v3.4Jitterbug v3.1HoloDark v1.6PPA v4.0qHAADF v1.7.1The already updated plug-ins: …
Higashimatsuyama, Saitama, Japan (April 30, 2019): HREM Research Inc. officially released HoloLive! that was introduced last year at IMC19 in Sydney, Australia. HoloLive! reconstructs and displays the phase from electron holograms in real time at the microscope during experiments. HoloLive! is the plug-in for DigitalMicrograph that was jointly developed with CEMES-CNRS, Toulouse, France. HoloLive! comes …
Higashimatsuyama, Saitama, Japan (Aug. 15, 2018): HREM Research Inc. introduced qDPC for DigitalMicrograph. The DPC (Differential Phase Contrast) is a technique to obtain a high contrast image from a phase object in STEM (Scanning Transmission Electron Microscope). The qDCP gives a boundary-artifact-free phase contrast image by integrating DPC signals contrary to the solution given by …
Higashimatsuyama, Saitama, Japan (Sept. 30, 2016): HREM Research Inc. introduced SmartAlign for DigitalMicrograph. The SmartAlign corrects slow instability of probe scanning system (scan distortion) from fast-acquisition multi-frame images using rigid and non-rigid image alignment. Thus, SmartAlign restores resolution before degradation, and improves image quality. Procedures of SmartAlign have been developed by Lewys Jones and Peter …